Tuesday, 17 June 2014

'55 Mercury . . .

I love this car when they take the spats off. Hodgey has been working on the air-bag system and in the middle of checking the ride heights and air pressures, he took the spats out just for better access to the rear 'bags'. The spata were only off for a short moment but geez they make this car llok sooo bloody good. Those wheels are sensational and need to be seen, BUT, Joe likes his spatsand they will be staying in place. . .

VW Volksrod . . .

 Front end is back in place and bonnet is back in its mounts, this rad ride is starting to look really sinister. The side skirts made up and installed by Dylan are obvious to the eye and look quite good and add a look of really low to the ground stance.  . .
Open up the bonnet and you can see the front end mounted into the new mount that the boys have made up in store for the rod. Not only does the new mount extend the wheel-base by seven inches, it also lowers the front end by three to three and a half inches. Above the newly mounted front end you can see the mods carried out bu Dylan. It all starts to fall into place now and the mods are fitting together really well to get this sinister looking beast onto the road. . .

EH Wagon . . .

Having a look into the rear section of the vehicle you can see that the mini tubs hardly make any impact into the available space and when finished will be basically invisible to the casual observer, The condition of this wagon is exceptional for its age. . .
I took this pic just to show you the condition of the engine bay and it matches the way the rest of the wagon is preserved. This wagon is one of those 'one off' finds that everyone wishes that they could find. It's madness how good this car is preserved. BTW, Hodgey has to make a few changes here as a modified HR front end is arriving shortly for the new running gear and the driveline is being changed over from the old Holden 'Red' six that was in place to a small block from the Chevrolet factory, personally I'd go for a carby fed LS series motor?

What to do. . .???

 Rudi's Studebaker is off to the glaziers for a full fillout of glass, only problem is that the fucking tilt -tray hasn't turned up to transport the car. What do you do? Ringing around and you end up with quotes up to $99 per trip. . .WTF?
As you can see from the above pic, the '34 Ford Pick-up is waiting in line behind Rudi's Studie. It's waiting for a trip to the exhaust centre for the exhaust to be modified and re-fitted, but where's the fucking tilt tray? Any of you guys have a tilt-tray for hire and run a reliable business? Anyone got a really good car trailer that we can borrow for a few bucks?  We even have had one gent, and I use the term loosely, he won't even answer his phone! How the fuck can we get cars transported when the trade won't even answer their fucking phones Gary???

Monday, 16 June 2014

VW Volksrod . . .


Whadya think? Dylan has just boxed in the front end of the rod and raised the fuel tank a few inches so that the big mods can continue out the front. He certainly does nice metalwork and the completed jobs are well ahead of his years. . . .
 You can see from hear the front boxed in section and the new high mount for the fuel tank. The crazy FN paintwork on this thing makes it look like a waste of time working on it, but it is quite a good project really, just fucked-up paint all over the thing. . .
This is the big job out front that I was alluring to.
This hand-made mount fits into the old mount and moves the front cross-member forward by seven inches and by raising the actual mounting points the front end gets lowered three inches. This is one solid mount and very, very cool how it changes the whole stance of the Volksrod. This is probably the most significant modification to the whole build of this car. Well done boys and very fucking cool. Looking back a couple of posts, you will remember Hodgey making up custom parts for the steering assembly, now you will understand why. It's all part of the big picture and it's all inside the Grand Master's head, Hodgey you da man!!!

EH Wagon . . .

 Dave has this inner tub sitting in place ready for welding. You can see from the gap that is left as to how much metal is going to have to be added to make the tub whole again. This small strip is why the finshed product is called a 'mini-tub'. . .
 Dave hard at work over on the driver's side. The inner tub is welded back in place as well as the metal trim that goes around the edges of the whell tub. . .
 Closer look at the metal dress ring that surrounds and supports the wheel arch, covering up the messy join and adding strength to the area. . . .
Mini tub in place just waiting on the middle strip being welded in. After welding the strip will be ground down for a smooth join and sprayed with body sealer deadener and no-one will know that the modification will have taken place. The tape doesn't lie is an old saying and apart from being a shit-house picture, the actual measurement is around 280mm, so should be no problems fitting in the 275 drag radial if needed for a bit of track time. . .

Sunday, 15 June 2014

Comments . . .


Seems as if after all this time, the administrator is the only one who see's the little pencils at the end of each posting, hahahaha what a fuck-up, I've been telling you for years to log in by clicking on the little pencil at the end of each thread and you have no idea as to what I'm talking about.
Alright, here we go with the new, and correct I hope, proceedure for you to post comments onto the forum threads. All you have to do is click on the heading of the individual thread that you want to post a comment on and the thread page will fully open on your 'puter and you will be able to click on the comments section at the end of my ramblings and post your comment.
Let me know if you have any problems and I will look into it. . .