Friday, 13 June 2014

Toot Toot . . .

Geez Davey gets around, one minute he's up the back welding in new mini tubs and the next minute he's parking his arse in the Volksrod to check the fitment and leg-room of the Hyundai donated seats. With a big roof chop and the back wall being brought forward a bit, the actual positioning of the seats is quite a tricky operation. Andrew is using Dave as his measuring stick because he's about the same size as the owner. Tell ya what, they might only be coming out of a Hyundai but they are bloody comfortable. . .

EH Wagon . . .

I tried putting up this pic last night but the puter had other ideas. As you can see from the pic, the wagon is in very good condition but things change quickly in this shop. . . .
Faark, it looks like Dave's taken out half the bloody side wall of the car in this pic, but it's just the angle so don't go shittin' your pants just yet!
Dave's been busy welding up the sides of the chassis rails where the inner spacing between the tubs and chassis rails have been removed. The rails look nice and tidy now and ready for the inner tubs to be welded into place. . .
You can see in this pic of the LHS chassis rail, Dave has been tacking the sides of the rail back in place before fully welding and then grinding things back together. . .
 Looking up through the wheel arch and into the cabin shows that although only a small strip of metal will be added to the tubs to widen the space, there is certainly a sizeable gap to be filled. Nice hood lining by the way!
This is the pic the shows roughly how much metal the boys will weld into the wheel tubs to get that extra width that is required for the bigger rims going on. By the time that they have welded in the strip, grinded out the rough edges and painted up the 'new' mini tub it will look like a factory wheel arch. . .

Thursday, 12 June 2014

Danny and Chris . . .

 The Boys have been hard at this big bucket for a couple of days, throwing a bit of metalwork into the cabin to fill the gaping hole above the trans and filling in the firewall. Interior metal mods are now complete and then the gents turned their attention to the big tub out back. I use the word 'gents' fairly loosely in this instance. . . hehehe.
First of all the tub was removed and all welding and grinding was comleted with the tub mounted into a custom made jig just for this tub so that she remained perfectly square. Then, as per the pic, the side wheel arches were replaced after carefull measurement and then drilling the tub walls for nut and bolt mounting of the wheel arches so that they can be individually removed at any time. Smart thinking that!, most panel shops would just weld them on and then you're stuck with them, this way if you geta little ding or scrathes, you can remove the panel and work away on it till your hearts content and then just screw it back on. . .

VW Volksrod . . .

Dylan hard at work with the seats for the Volksie. The seats were 'donated' from a Hyundai and after Dylan completes the very difficult and time consuming job of removing and reversing the mounting brackets and running raile, the seats will be able to be bolted in and with the 'running gear' removed, a quick check fit showed the seats to be a perfect fit for the little Rod. . .

Ziggy's Studie . . .

 When the blankets come off this thing, you really have to sit back and take a good hard look. This is one classy, classic ride. Andrew has mounted the side engine covers and the bonnet and from the out-side she looks like a sweet ride.
Unfortunately the boys can't get stuck into the interior until the auto elec gets his arse into gear and gets some more of the wiring complete. Seems like Quicky is on the 'go slow' ???

EH Wagon . . .

 
 An EH wagon all the way from Sydney arrived with a lot of the panel works already completed and the interior well on the way to being finished also, but then as in so many cases the owner wants decides to go in a different direction. Mini tubs, shortened diff with big rims and of course the six has to make way for a V8. . .
 As you can see in this pic, Dave has cut out the rear wheel arches right in the middle ready for a bit of widening. You can also see new enamel paint, hood-lining and gauges up front, as I said, things had been progressing fairly well before the change of direction. I also believe that there will be a change in paint scheme also?
 Dave, hard at it underneath, cutting the wheel wells out to the chassis rails with the power saw. Hard work and a dangerous job, if that bloody saw suddenly 'grabs' into the metal, the bastard of a thing could throw you across the room. . .
Dave has cut the arches completely out to the rails and you can see him measuring up the second half of the rear tub so that it can be trimmed up and welded into its new position. After welding, this will leave approx., one inch gap right around the wheel arch which is filled with a welded stip of thin gauge steel and will look like it's meant to be there. This is also why these are called mini-tubs and not full blown tub job which would require the chassis rails to be cut up and moved further in-board . . .

Tuesday, 10 June 2014

Milestone . . .

Hey Guys,
Just to let you know that we have now had over half a million visitors to this blog site. Just goes to show how many of you are interested in what the Big Fella and his Boys are turning out.
We would like to thank all of you for your visits and we intend on keeping things pumping, so you guys keep clicking your mouses and we'll keep you updated. With all the proposed changes from our duly elected beaurocrats and more powers to the dog squad there's gotta be changes to the way we mod our cars and bikes, rest assured fellas, we have one of, if not, the best Engineers on the team and we will keep you all informed on any updates or changes from the sheep in the top paddock.
Drop in or drop us a line we love hearing from you.
Remember if you want to make any comments on any of the posts, just click on the little pencil figure at the bottom of each post and you're in. . .
Bruce