Thursday, 11 July 2013

'63 Buick. . .

Big Mexican being picked up and finally on her way home. Takes nearly half an hour to pump up the suspension the bloody thing is that big. . .

Clean Up. . .

 New job in for a clean-up before going on the market for sale. This one is a '64 Chev 'Bel Air', I'm thinking. Owner wants a fair bit of work done to her so that she comes up spik and span. .
 Unbelievable the amount of trash that seems to accumulate in boots and the bigger the boot space the more shit that fits in. Not normally a worry but when the boys have to get into the shock mounts for a bit of lowering work, it makes for unnecessary and paid for work. . .
Dylan has started with removng the bonnet cowl while the other two worked on the front brakes which were in need od some serious attention. . .

Monday, 8 July 2013

Johnny's Trike. . .

Johnny spreading the cheeks so that we can see how much load the rear seat can carry without upsetting the coil-over suspension. He's also checking the new rear seat's squab for placement and comfort. . .
Dylan thought that a squab was some fancy bird bred specially for the restaurant,doesn't matter either way, if Johnny sits on them, they're both dead, says Dylan. . .

'63 Buick. . .

 Sills are in and sprayed with body deadener, looking brand new. . .
 Driver's side sill is finished and floor wells have had patches repaired and sprayed heavily with body deadener to eliminate some of he road noise that this beast creates running so low to the ground. . .

Final weld patches to be taken care of in the boot. Dave cut out flat sheet and carefully moulded it into the required shape before tack welding it into place. . .
Once it's tack welded into place Dave can get Dylan to run around the patches for a bit of practice and then run some Sikaflex around the jois before giving it a spray with the body deadener. . .
Valve system in the boot for the air-ride suspension. . .

Saturday, 6 July 2013

'39 Studebaker. . .


 New alloy radiator in place and looking very sexay. . .












 
Woohoo, have a look at that radiator hose. Radiator comes complete with three outlets and also fittings for auto transmission cooling. Plyboard on back of radiator is to protect the delicate fins from any accidental damage while work is being carried out in the engine bay. . .

Johnny's Trike. . .

I got no idea as to how there's work being done on Johnny's trike on a Friday but Andrew has found a couple of nice pieces that go together perfectly to make up the back rest for Johnny's bad-arsed little tricycle. . .

'63 Buick. . .

 A couple of pics that I found. This on shows Dave using Sikaflex to hold the sill in place so that he can tack weld it and the Sikaflex will also seal any gaps under the sill when finished in place. You can see the holes drilled equidistance apart for the two sill panels to be spot welded together. . .
Thes two sill panels have been tack welded and Sikaflexed and are now awaiting final welding. .