Saturday, 6 July 2013
Johnny's Trike. . .
I got no idea as to how there's work being done on Johnny's trike on a Friday but Andrew has found a couple of nice pieces that go together perfectly to make up the back rest for Johnny's bad-arsed little tricycle. . .
'63 Buick. . .
A couple of pics that I found. This on shows Dave using Sikaflex to hold the sill in place so that he can tack weld it and the Sikaflex will also seal any gaps under the sill when finished in place. You can see the holes drilled equidistance apart for the two sill panels to be spot welded together. . .
Thes two sill panels have been tack welded and Sikaflexed and are now awaiting final welding. .
Thes two sill panels have been tack welded and Sikaflexed and are now awaiting final welding. .
The Ziggy Mobile. . .
Been a while since there has been some action on the old Zigg Rod, so here's a quick look at some outstanding hand-made panelling from the big fella himself. This is one of the two front inner guards that Hodgey has made for Zigg's '39 Studi and they look fantastic fitted into place on the car. . .
'63 Buick. . .
The Awsomenator has been hard ar work under here with new sills in place and some pretty ugly floor panels waiting for a bit of work also. . .
Being an older car, the boys had to dig a shit load of lead out of these areas before they could get in to repair the rust work. At ths stage it is unclear as to how to replace so much lead and keep the lines straight. . .
This is the passenger side, being a LHD vehicle, and the rust problems weren't so bad and she cleaned up a lot easier than the other side. . .
Being an older car, the boys had to dig a shit load of lead out of these areas before they could get in to repair the rust work. At ths stage it is unclear as to how to replace so much lead and keep the lines straight. . .
This is the passenger side, being a LHD vehicle, and the rust problems weren't so bad and she cleaned up a lot easier than the other side. . .
Tuesday, 2 July 2013
'63 Buick. . .
Dave and Dylan have been working on the big Buick all day and you can see from the first pic that there was a fair bit of rust to cut out, actually there is a hell of a lot more to go yet. . .
Second pic shows that the boys have been hard at it and if you look carefully you can see that Dylan has spent quite some time shaping the new patches remarkably well to fit the gaping holes left by the grinder cut-outs. . .
Second pic shows that the boys have been hard at it and if you look carefully you can see that Dylan has spent quite some time shaping the new patches remarkably well to fit the gaping holes left by the grinder cut-outs. . .
Johnny's Trike. . .
Eagle-eyed Andrew spotted this back support whilst walking and talking at the recent 'Fridge' swap meet. Sits well on Johnny's trike and will be added at a later date, much to Johnny's disgust. . .
Monday, 1 July 2013
Johnny's Trike. . .
Mounting for the rear seat in place. . .
Andrew working hard on the cowling to cover the rear-end workings and to allow air ino the radiator. Might get Andrew to keep Johnny busy up this end of the shed so he can't see the 'special' parts that we've found and are now using on the HJ. Obviously he didn't need them anyway. . .
Andrew working hard on the cowling to cover the rear-end workings and to allow air ino the radiator. Might get Andrew to keep Johnny busy up this end of the shed so he can't see the 'special' parts that we've found and are now using on the HJ. Obviously he didn't need them anyway. . .
Subscribe to:
Posts (Atom)











